No products in the cart.
WiseBond Bar and Table Top epoxy is a super wet gloss epoxy for bars counter tops faux marble finishes and table top flood coating. Zero VOC low odor and the perfect viscosity for a 1:1 mix ratio table top epoxy. The 1-gallon kit includes 1/2-gallon of resin and 1/2-gallon of hardener. This wood and concrete top coating epoxy has a 1/8 inch self-leveling high gloss finish epoxy that is UV stable for surface flood coating. This table top epoxy produces a rich super gloss water-like look. It is typically used for a 1/8 in. thick finish coat for bar tops tables river tables and most any table or counter top surface. It can be tinted with mica powders dyes and alcohol pigments for stunning faux finishes. It delivers a flood coat ideal for applications requiring a high level of see through transparency and high gloss. WiseBond Bar and Table Top epoxy features a low exothermic reaction cure giving plenty of time to perfect your wood table project. It has virtually no odor and can be used indoors without ventilation or bulky respiration equipment. Each epoxy kit includes a resin part-A and a hardener Part-B. Thoroughly mix 1 part of A-side resin with 1-part B-side hardener for 3-5 minutes and transfer to a clean secondary mixing container and mix again for proper mixing. Apply to the surface between 77F-85F. Allow 12-24 hours between pouring additional layers. Sand with 320 grit if longer than 24 hours between pours. Wait 3 days for a full cure and 30 days for a full hard cure. Once epoxy is fully cured for 30 days it is FDA compliant for incidental exposure to food. It is not antimicrobial. Epoxy is not safe to ingest liquid or cured. Do not cut on or prepare raw food on epoxy surfaces.